Spring flower wreath

img_0198

I love how this was made from bits and pieces…

The cardboard box was cut into a ring doughnut shape using a craft knife around a dinner and side plate as templates. Honestly, the finished piece looks as good as a bought polystyrene ring would.

The ring was then wrapped with strips of burlap to give a bit of dimension and cover the card. Any plain fabric, canvas or even paper would do. I then wrapped lace effect cord on top of the burlap at about 10 centimeter spacing with about 20 cm spare at the end, which I pinned through the burlap to create a hanger.

You could use a longer loop for hanging if you wanted your cord to show and garden string looks good on burlap if you don’t have a long enough piece of cord. If you tie shorter pieces of string together, glue your decorations over the knots.

Pre cut, die cut flowers from a craftwork cards beau paper kit were stuck on with hot glue and supplemented with flowers cut on the scan n cut from the same paper pack.  I found putting the flowers on the inner and outer of the ring face added more dimension.

l added  ‘candi’ to the flower centre as a bit of detail,  but the waste from the office hole punch would work, as would beads or buttons if you like more frill effects.

When you feel it looks full enough, hang it up to check from every angle and fill in the gaps, as fuller is better to plump up the paper.

The beauty if this is that the theme and colours could change according to the paper you have –  from a glittery festive to a ‘natural’ palette.

 

Scan n cut snowflake garland/paper bunting

img_0185I followed a scan n cut you tube idea to create some home made decor this year. A modern version of paper chains!

For a Christmas themed garland you will need to cut out an assortment of paper snowflakes in different sizes.  I used a selection of papers and wish I had chosen doubled sided stuff as the garland twists a little in use.

if you don’t have a cutting machine folding the paper and hand cutting is an option if you have the time (or child labour!)

at the sewing machine pull a long tail of thread through then sew a long straight stitch through the centre of the first flake. (I used a white thread as most of the papers were pale or had white in but a contrast thread in a decorative stitch might be fun).

Be brave, go straight off the end of the flake and sew a few stitches in the gap before you put the next snowflake through. This creates a chain for your garland. You can overlap a few flakes or stitch a small one on top of a larger one as well.

Continue for the length you wish and leave a long tail of thread at the end for tying.

Easy to recreate for Valentines, Spring, Easter, Birthday, Halloween or Anniversary versions  …

Tip: remember that paper will blunt your machine needle

Papier-mâché experiment

img_0196 img_0197

 

A charity shop papier-mâché kit find motivated me to try bowl making… the kit suggested moulding the paper pulp provided around semi inflated balloons but my balloons were perished (the kit had probably been lingering in the shop for a while ) so I wrapped two bowls in cling film before moulding on the moistened pulp.

Pulp was much faster and less messy than tearing up squares of paper and pasting with glue as we did at school.

however, it was harder to get a level surface with pulp and when dry was rock hard, so when I tried to pull the bowls from the mounds they lost a little of their shape.

metallic finish paint to the rescue! Haven’t a clue about brand or colours as it came in the kit, but thre blues and the gold were lovely and I have saved the dregs for painting another box one day

Conclusion, my dexterity is not good enough to gift these bowls but I am glad I tried my £1.50 experiment. if I repeated the exercise would decoupage the finished bowls to distract from the flaws.

Who needs to buy a Fuse to make shaker pockets?

not me! Thanks to the brilliant frugal crafter blog, I dug out the hot fix soldering tool (meant to put gems on fabric) and sealed up some page protectors into mini pockets.

img_0194I used a steel ruler and silicone mat to avoid mishaps and tried not to worry about the burning smell!

i sealed three sides of my pocket and checked the seal was good before adding sequins and glitter then sealed the fourth side.  I then cut off the excess with scissors to make everything neat. Sometimes I did a double seam if I wasn’t confident everything was glitter tight.

Somehow I have lots of (unwanted) glitter and sequins which I managed to use lots of, so stash reduced and lots of card or tag ready sparkly little pockets created, for free!

Cube door stop

image

Am trying to use up some scraps of upholstery fabric so cut six squares  and a strip for another door stop.

if you make with lighter weight material you will need heavy duty interfacing

method: fold the strip- about the same length as the side of a square –  edges to middle and then fold in half and straight stitch along the length on either edge to create a handle. Position the handle on top of the centre of one of the squares and sew the ends firmly with a quarter inch seam. This seam will be hidden later.

take four squares to form the sides of the cube. With right sides facing and a half inch seam,  fix them in a box shape then pin the top square facing downwards carefully to form the cube lid.

seam  the top to the sides, go slowly round the corners to catch all the bulk and keep a consistent half inch seam to fix the handles in place

check your work before pinning the bottom square in place, still wrong sides facing. Seam as the top but leave a gap for turning. Leave at least three fingers for your turning gap as the fabric is bulky.

check the seams at the corners and maybe go round again as the finished cube has quite a lot of weight to bear

turn Right side out through the turning gap in the bottom. stuff at least  two thirds of the cube with pillow stuffing (it will take more stuffing than you expect and you don’t want it saggy from understuffing) and then fill up with gravel, lizard litter or rice. Hand stitch the gap closed to finish.

 

Little bag of tags

img_0598 img_0599

Scraps of card were cut into label shapes with the scan n cut then decorated with die cuts from the enormous , seemingly endless,  Natures Gallery Docrafts bundle. I stamped ‘to’ and ‘from’ and tied twine in place then made a mini folder pocket to hold them in.

I then got in the mood with old Christmas cards cut the same way and a shaker card version too. This required a bit of organization to put the same weight of card through the scan n cut at the same pass but really effective.

image

Lampshade rejuvenated

imageWe couldn’t find a lampshade to replace the tatty one so simply splashed the remains of a glittery fabric paint over the old shade.

the instructions said to spray lightly but in an all or nothing attempt to cover marks I soaked the shade by emptying the contents over it and rubbed the solution around with a plastic spoon

a long drying time later I am really happy with the results and have resisted the temptation to embellish more